The hottest global cutting tool market has an annu

  • Detail

The global tool market grew by 5% annually and the domestic growth rate was 3 times

since the tool sales fell to the bottom in the second quarter of 2009, the recovery was very good. According to the data, in 2010, the total production of domestic cutting tools in China was 29billion yuan. In addition to supplying the domestic market, the export of cutting tools was 7billion yuan. In the same year, China's total sales of imported and domestic cutters reached 33billion yuan, ranking first in the world. China's cutting tools increased by 40% in 2010, and the growth in the first three quarters exceeded 50%. In 2010, the sales of foreign cutting tool enterprises in China also increased very well. There is no development without market demand. With market demand, this is our biggest advantage

among the 33billion yuan sales, the 11billion yuan imported tools are all modern high-efficiency tools. Among the 22billion yuan national high-end technology breakthrough tools, only about 2billion yuan can be called modern high-efficiency tools, accounting for 10%~15%, while the sales of foreign brand tools account for 1/3 of China's tool consumption This shows that while China has become the world's largest cutting tool market with the most development potential, the high-end market is occupied by multinational enterprises, which is a big problem

in 2011, the domestic tool market still maintained a high-speed growth, creating a new historical peak. Statistics show that in the first half of the year alone, the domestic cutter Market achieved a growth rate of 25% ~ 30%. At the same time, a large number of food in various countries have become garbage that needs to be treated due to expired deterioration. Although the growth rate has dropped since July, it can still achieve a growth rate of 15% in the whole year. Comparatively speaking, the international tool market has maintained a stable recovery in recent years, but the annual growth rate is conservatively estimated to be only about 3% ~ 5%. After the rapid growth of last year, the domestic market will gradually maintain a stable annual growth rate of 10% ~ 15%. Therefore, the growth rate of the domestic tool market capacity will be more than 3 times faster than that of the international market

China has become the world's largest cutting tool market with the most development potential, and many multinational cutting tool groups, without exception, regard expanding their cutting tool sales in China as their first choice in their development strategies in the post crisis era. The Asia Pacific headquarters, R & D centers, training centers, logistics centers, etc. of various enterprises have settled in China, so as to radiate Asia with China as the center and serve customers more directly and conveniently, Better meet the special needs of customers in the Asia Pacific region. Secretary of the International Association of mold, hardware and plastic industry suppliers 9. Displacement indication error: within ± 0.2% of the indication value. According to Luo Baihui, the chief author, the reason why the Chinese market is so valued is that the Chinese market sales share accounts for an increasing proportion of its global market share. In order to firmly grasp the Chinese market, foreign tool manufacturing enterprises are carefully studying the needs of China's equipment industry. For example, shangao tool set up an industry development department this year, aiming to take the industry as the research object and focus on providing solutions for the processing of typical parts in the industry. The technical experts of the Department are respectively responsible for a key industry, paying attention to the development trend of the industry, solving the technical problems of tool application in the industry, and holding tool application training for customers in the industry from time to time

stevemorency, President of the American Cutting Tool Association (uscti), said that globally, the market is quite busy in North America, Europe and most of Asia. At the emo2011 machine tool exhibition held not long ago, it seemed that the participants were looking for processing solutions that could solve production problems, rather than just purchasing. The sales of machine tool manufacturers at the exhibition seem to be quite strong. Many industries have provided opportunities for growth. The development of aviation (especially commercial aircraft), automotive, medical and energy industries is in the ascendant

the sales data reported by uscti member enterprises show that the recovery has been very good since the tool sales fell to the bottom in the second quarter of 2009. Although the sales growth in the first few months of 2010 stagnated slightly, the annual sales value still increased by 24%. The sales growth in 2011 was even stronger. As of August this year, the sales growth exceeded 31% to US $1134million. However, Morency believes that there are also some problems and concerns to curb this optimism, one of which is the slow economic recovery and high unemployment rate in the United States. In addition, due to tight supply, the price of raw materials is rising. In the past months, the price of cemented carbide has risen by 40%-50%, and people are worried that it may rise further in the future

Copyright © 2011 JIN SHI